The IRIS S12W PIR Motion Sensor is an intelligent presence detector equipped with Wi-Fi connectivity for seamless control and customization via mobile app. With a 360° detection range and adjustable time delay and Lux settings, it activates connected lighting systems based on motion and ambient light. Designed for indoor environments like offices, hallways, and residential spaces, the IRIS S12W offers full remote management, allowing you to set schedules, adjust sensitivity, and monitor energy usage. Rated IP20, it’s easy to install and provides a reliable, energy-efficient solution for automated lighting control that enhances convenience and safety.
Installation Steps
- All electrical installations must be carried out by a suitably qualified and registered electrician.
- Always isolate mains power before installation.
- Remove the cover by checking the notch on the LDR side.
- Use the base to mark the drill holes on the mounting surface.
- Drill holes and insert the wall plugs if required.
- Feed power cable and load cable through base holes and securely affix the base.
- Connect the power wire and the load wire to the connection terminals according to the electrical connection. Do not exceed the max rated load.
- Replace and secure base cover, calibrate and replace the front cover.
Reviews
There are no reviews yet.